These tilted plastic chair leg caps are very convenient to put on your chairs. They protect your floor from scratches and unwanted damage and also protect the chair legs from damages.
For easiest application, turn the furniture upside down. Wipe of any dirt, grease or dust from the leg pipe and press on the legs caps. If necessary use a rubber mallet to knock on the pad.
The Tilted Plastic Chair Leg Caps are very useful and convenient caps to put on the chairs with a slight tilt to the legs. They are used to protect the furniture and floor. The caps are made from high-quality plastic and do not easily wear off. Not the lease, they aren't making any marks on the floor.
Example of chair leg that is of a solid material, i.e. wood or steel.
The bottom of the chair leg
MEASURE THE DIAMETER OF THE LEG CLARIFICATION!
Take a measurement from the outer sides of the bottom, make sure the ruler is paced in center of the bottom circle. The furniture leg's diameter will be having the exact size as the outside pad's diameter.
Example of an outside furniture pad.
Example of chair leg that is like a tube, primarily steel legs of steel of iron.
The bottom of the chair leg
MEASURE THE DIAMETER INSIDE THE LEG CLARIFICATION!
The furniture leg's inside diameter will be having the exact size as the pad's diameter.
Example of an inside furniture pad.
Furniture leg
The bottom of the chair leg
MEASURE THE DIAMETER ON THE BOTTOM CLARIFICATION!
The pad to be fitted on-top doesn't neccessarily have to match the exact diameter, it's ok if the pad is matching or having a bit smaller size.
Example of an on-top furniture pad.
Ruler.
check_circle
check_circle
FAq
Shipping & Returns
Contact Us
