Flat furniture foot that snaps into a matching holder and can be easily removed using a screwdriver. Available in several sizes and ideal for chairs and similar furniture.
The system allows for quick replacement of the foot part when it's worn out or when the furniture is moved to a different type of flooring. All components are clearly labeled for easy identification.
For easiest application, turn the furniture upside down, Wipe of any dirt, grease or dust from the pipe and press the caps into the leg pipe. If necessary use a rubber mallet to knock in the pad.
Get the pin that fits into the tube here, and from then on you can order only the foot part.
Example of chair leg that is of a solid material, i.e. wood or steel.
The bottom of the chair leg
MEASURE THE DIAMETER OF THE LEG CLARIFICATION!
Take a measurement from the outer sides of the bottom, make sure the ruler is paced in center of the bottom circle. The furniture leg's diameter will be having the exact size as the outside pad's diameter.
Example of an outside furniture pad.
Example of chair leg that is like a tube, primarily steel legs of steel of iron.
The bottom of the chair leg
MEASURE THE DIAMETER INSIDE THE LEG CLARIFICATION!
The furniture leg's inside diameter will be having the exact size as the pad's diameter.
Example of an inside furniture pad.
Furniture leg
The bottom of the chair leg
MEASURE THE DIAMETER ON THE BOTTOM CLARIFICATION!
The pad to be fitted on-top doesn't neccessarily have to match the exact diameter, it's ok if the pad is matching or having a bit smaller size.
Example of an on-top furniture pad.
Ruler.
check_circle
check_circle
